|
Portal Frame VMCs Maximize Efficiency for Oversized Parts
Bridgeport’s line of performance VMCs are designed for applications specific to the machining of oversized parts, especially for the aerospace, automotive, and moldmaking industries.
http://www.cnctimes.com/issue/cnctimeslink1.htm
Multistar - for maximum productivity and precision
Especially suited for Volume production of small precision parts from non-ferrous metals, steel or stainless steel
http://www.cnctimes.com/issue/cnctimeslink2.htm
High-speed Functions and an Improved Standard of Reliability
Mitsubishi
is premiering the newest wire EDM at
Westec 2001. Some of the world’s
fastest technologies are combined in
Mitsubishi’s new, reliable FA10
submerged wire EDM machine.
http://www.cnctimes.com/issue/cnctimeslink3.htm
High rates - at low power consumption!
The successful CoroMill 390 long edge cutter system is now available in a further developed programme - a new heavy duty version using strong 18 mm inserts, covering heavy to light operations.
http://www.cnctimes.com/issue/cnctimeslink4.htm
Boosting Productivity For Turbine Engine Part Makers
Compared with common steel, the heat-resistant super alloys (HRSAs) and other hard metals used in jet engines and ground-based turbines require far longer cycle times per part. Advanced cutting inserts can boost machining throughput with these materials, but achieving these gains requires proper tooling selection and proper implementation.
http://www.cnctimes.com/issue/cnctimeslink5.htm
Mastercam V 9 now shipping
Just when you thought it couldn’t get better, the most widely used CAD/CAM software has added a list of enhancements for Mastercam’s new Version 9.
http://www.cnctimes.com/issue/cnctimeslink6.htm
New AGV Technology Offers Quick System Configuration
Q-CAN, a new product from Siemens Dematic, offers quick, configurable automation for AGV systems at significant cost savings.
http://www.cnctimes.com/issue/cnctimeslink7.htm
Re-Evaluating The Controlled Cycle Lathe
The gap between manual lathes as found in a toolroom and CNC turning centers as found in a production plant is very wide. Many applications call for something in between—a turning machine that not only lends itself to making a single part or a small batch of parts, but also lends itself to complex or difficult operations.
http://www.cnctimes.com/issue/cnctimeslink8.htm
Calypso Software for CMMs
Calypso gives you the freedom to focus on the dimensional analysis of your parts. Create measuring programs right from your inspection requirements. No more sequential inspection plans, structured programming or messy code. Just select what you want to measure, in any order, and Calypso does the rest.
http://www.cnctimes.com/issue/cnctimeslink9.htm
Build Rich Front Ends to Your Web Applications
When Macromedia acquired a little vector-based animation program called FutureSplash in 1997, it renamed the program Flash. At the time, few imagined that Flash would eclipse all other plug-in content technologies, even Macromedia's own, once-flagship product, Shockwave.
http://www.cnctimes.com/issue/cnctimeslink10.htm
|
COMMUNITY
OF CNC PROFESSIONALS |
|
Avail the opportunity of interacting
with CNC Professionals in respective
fields. Address your queries to editor@cnctimes.com
Mr.
Ashish Poddar
Mr.Gautam Doshi
Mr.Raj Khanna
Mr. P. K. Ganguly
Mr. Neil Ginley
Mr. A. Venkatesan
Mr. Makarand
Kulkarni
|
Managing Partner
of Ask Me Software Systems will
address issues on CAD/CAM .
Productivity &
Quality Improvement Services, will
address issues on CNC Machining.
Consultant for CNC
Machines selection
and
Applications.
Managing Director, Techlink Machine Tools Pvt. Ltd. will address issues on EDM and WEDM Technology.
CNC Machine Tool Retrofit
Manager, Pennine Automation Ltd., U.K. will address issues on CNC Retrofits.
Hindustan Motors Ltd. will address issues on CNC
Maintenence.
Asst. Manager, Kirlosekar Copeland Ltd. will address issues on CNC Training and CNC Machining problems
|
|
If you are interested in sharing
your expertise, click
here for Join this
community.
|
