|
|
Desktop 3D Scanner Captures Part Shapes
Scan it. Cut it. That’s the approach many shops would like to take. A new desktop laser scanning system promises to make that a practical reality at low cost. The system allows 3D objects to be digitized so that surface data can be used to create part geometry for toolpath generation. The NextEngine Desktop 3D Scanner from NextEngine Inc. (Santa Monica, California) uses a set of laser “eyes,” digital camera technology and image sensors to capture scan data from multiple, triangulated views. The system’s special software assembles and manipulates the data to create a 3D model suitable for use in a CAM system.
|
Are you searching for an experts in the following areas?
- 3D Modeling
- Finite Element Analysis
- Detailing & Drafting
- Design Optimization
- Engineering design
- Stress analysis & simulation
- Product development
- Mathematical Design
- Design Modifications
- Concept development
- Concept to reality
- Rapid Prototyping
- Reverse engineering
- Proposals & Presentations
So you can stop your search now !
Please contact us for further information;
S M TECHNOCRATS PVT. LTD.
102 / 103, Veena Beena Complex,
Opp. Bandra Rly Station, Bandra (West)
Tel : +91-22-66991191
Telefax : +91-22-66991171
Mobile : 09820470784
Email : aloke@cnctimes.com
Website : www.smtechnocrats.com |
Solutions for Your Large Mold Machining Challenges
|
|
The demand for large, highly cosmetic molds is growing rapidly. From flat-screen TVs to automobile dashboards, designers are pushing the size and complexity of molds. Given this fact, large mold manufacturing is an area where many shops are finding opportunity to compete globally.
>> more |
| |
|
|
|
Trumpf and Jenoptik co-operation in fibre-laser optics
JT Optical Engine will develop, produce, and sell optical modules known as “optical engines” for fiber-optic lasers. Next to pump diodes, control and beam management, the optical engine is an important component in fiber laser devices. The joint venture company will offer the modules to third parties worldwide and supply both Jenoptik and Trumpf.
|
|
How to Handle Your Heaviest Molds
Moving molds that weigh 30 to 70 tons and more to and from the toolroom can be a chore, not to mention the time and effort the mold change crews spend in struggling to get the molds in and out of the machines. The use of the appropriate wheeled transporter technology offers a new option for moving the largest of molds freely between all areas of the plant.
|
A Practical Guide To Presetters
Mr. McCarthy is a national sales manager for tool measurement systems with Big Kaiser Precision Tooling (Elk Grove Village, Illinois). The tool measurement devices he helps shops to implement are commonly known as “presetters.” The term may be somewhat misleading, because shops using these devices enjoy a range of benefits even if they don’t literally “preset” their tools. Typically, the most significant of these benefits is saving time at the machining center. As an alternative to using feeler gages and test cuts to determine tool offsets at the machine, using a presetter to perform independent tool measurement away from the machine can free up considerable productive time.
|
CIMdata ranks Delcam development team as largest in CAM industry
 |
Delcam has the largest software development team in the CAM industry according to the latest NC Software and Related Services Market Assessment from renowned US consulting and market research firm, CIMdata. The report states that Delcam has 125 staff in CAM product development. This is 15 developers more than sales leader Dassault Systemes, over 50% more than UGS, and more than three times as many as PTC, which had only 35 CAM developers in 2006.
>> more
|
| |
|
|
AC and DC servo motor repair business set-up
Field service and maintenance specialist, CP Automation has opened a new business specifically to handle the repair and sales of specialist motors, notably AC and DC servos.
Called Euroserv, the new business will also deal with associated products such as inverters, resistors and encoders. The Tyne & Wear based business has already established client relationships with companies including Nissan, Rolls Royce and Siemens.
|
Mastercam X2 Now Certified for Autodesk Inventor 2008
Mastercam X2 CAD/CAM Software has been certified for Autodesk Inventor 2008 software by the Autodesk Inventor Certified Applications Program. To be certified, the product must meet certain guidelines and demonstrate a high level of quality as well as compatibility with Autodesk Inventor. Certification is given only after the product has been tested and approved.
|
