Bar peeling from Dormer Pramet

By Niraj M Wanikar, Chief Editor, CNCTimes.com, 2022-01-04 13:13:00

Bar peeling is a specialist application which requires relatively high feed rates and small depth of cut applied to round bars and thick-walled tubes.
 
Operations include the removal of surface layers of oxides, rolled contaminants and cracks caused by hot forging or rolling. This is mostly done in carbon steel, alloy steel for heat treating, tool steel, stainless steel, and heat–resistant alloys.
 
The advantages of peeling in comparison with turning are higher productivity, less inserts consumption, excellent roughness quality and high dimensional accuracy.
 
Bar Peeling inserts are generally mounted in two ways, either using a screw through the centre hole of the indexable insert or via a top clamp mechanism. Using a screw through the insert, distributes the forces in the axial and radial directions at the same time, leaving more room for chip evacuation.
 
Clamping from the top significantly reduces the time to flip the insert and is more user friendly. This is because it only takes a few turns of the clamping screw to loosen it, allowing for faster indexing of the cutting edge.
 
At Dormer Pramet, we provide a range of cutting tools, specifically for bar peeling applications. Our inserts, within the Pramet brand, are designed and manufactured to meet the most demanding machining processes.
 
The offer includes standard and special tools that ensure high efficiency, optimal surface quality and reliability in a range of peeling operations. Our state-of-the-art production methods for cemented carbide grades and MT-CVD and PVD coating layers, reduce edge wear and increase the tool life.  
 
Bar peeling indexable inserts have different cutting-edge geometries to create chips with the required shape necessary for a smooth removal from the inside of the cutting head. This is one of the most important factors affecting the efficiency of the bar machining process. The wide variety of materials to be machined encourages tool manufacturers to continuously improve both tool geometries and carbide grades.
 
In a recent addition to the bar peeling inserts, we now display on the tool, not only the geometry of the insert (PM), but also the variant of support facet on flank surfaces (S01, S02 or S03) and of course the grade. This helps the customer to recognize the difference between inserts with the same size and geometry, but a different edge preparation.
 
Also, accurate holding cassettes have a significant impact on the machining process. There are many manufacturers of machine tools for bar peeling around the world. Most of these use different holders in their cutting heads which are equipped with proprietary cassettes for the inserts.
 
To showcase the wide range of tools for bar peeling, we have produced a new catalog which outlines the wide range of indexable inserts and cassettes that are used on machine tools of different manufacturers.
 
Within the publication is a technical section, which features detailed information about the geometry of cutting tools, materials, calculation of machining parameters, recommended initial cutting speeds and a trouble shooting guide to help respond to the most common problems during machining.
 
Please contact your local Dormer Pramet sales office for further information and advice regarding our bar peeling assortment. 

• Follow @CNCTimes