GEAR MEASURING MACHINE from WENZEL GT
The new GT series is based on our successful tradition in the development and production of specialized gear measuring machines. However, many, decisive details have been improved in the new development. For example, the new GT series now works with our standard controller WPC and is used with a completely new software developed by WENZEL. With the GT series WENZEL sets standards: gear measuring technology grows together with universal measuring technology: tactile and optical!
WENZEL GT 300
The GT 300 was especially developed for the measurement and analysis of smaller gears and rotational symmetrical parts from the automotive industry. Optionally the GT 300 can be equipped with a tailstock for measurements between centers.
WENZEL GT 450
The GT 450 gear measuring machine is typically used in the aerospace, automotive and their supplier industries. It allows the precise analysis of gears and rotationally symmetrical partsup to a diameter of 450 mm. Equipped with a tailstock, shafts with a maximum length of 650, 900 or 1200 mm can be measured on this gear measuring machine within a measuring range of 650 or 800 mm.
WENZEL GT 650
Due to the maximum measurable diameter of 650 mm, the GT 650 is especially well suitable for the analysis of geared parts and shafts used in commercial vehicles, rail transmissions or construction and agricultural machinery. In the standard version of this gear measuring machine, face widths of up to 650 or optionally even 800 mm can be measured.
WENZEL GT 900
Whenever engine components for aviation or smaller marine gear units need to be measured, GT 900 is the ideal gear measuring machine. It is equipped with a movable tailstock. Therefore the measuring machine can be loaded easily. Using the tailstock parts with a maximum diameter of 900 mm can be measured. The GT of this size is equipped with active damping by standard. This assures high precision measurements of big parts even close to production.
WENZEL GT 1200
Components for large scale machines from the field of machinery and plant engineering need a suitable gear measuring machine, the GT 1200. It is the largest measuring machine of the GT series and is equipped with a movable tailstock. This makes an easy loading with large and heavy parts possible. When using the tailstock parts with a maximum diameter of 1200 mm can be measured. The GT 1200 does not need a separate foundation. Active damping absorbs vibrations and assures reliable measurement procedures.